Visit synergysystems.com.au for all member locations HPU-M50 $15.50ea FROM Including GST 750ml Expanding Foam Filler GENERAL PURPOSE HAND Seals Insulates Expands To be used before: see bottom of the can MCFPUDM750 XFOAM PRO polyurethane (PU) foam hardens via air humidity and is suitable for sealing, fixing, insulating and filling. It will expand by 30–50%, be tack-free after 5–10 minutes and hard after 1.5–5 hours. It has excellent adhesion to construction materials such as wood, concrete, brick, marble, steel and aluminium, but no adhesion to silicone, polyethylene or PTFE. Application: before use, shake the can vigorously with the valve upside down. Remove the protection cap and screw the nozzle onto the valve. Invert the can and use the trigger on the adapter while tilting the valve to extrude the foam. Before using XFOAM PRO, moisten surfaces and ensure that they are clean and free from dust and grease. The ideal ambient and can temperature is 20–25°C (68–77°F). After use, immediately clean nozzle with XFOAM PRO Cleaner and store the can in a vertical position. WARNING: Content: diphenylmethanediisocyanate, isomeres and homologues; Alkanes C14-17, chloro. Hazard statements: Extremely flammable aerosol. Pressurised container: May burst if heated. Causes skin irritation. May cause an allergic skin reaction. Causes serious eye irritation. Harmful if inhaled. May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause respiratory irritation. Suspected of causing cancer. May cause harm to breast-fed children. May cause damage to organs through prolonged or repeated exposure. May cause long lasting harmful effects to aquatic life. Contains isocyanates. May produce an allergic reaction. Precautionary statements: Keep out of reach of children. Obtain special instructions before use. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use. Do not breathe vapours/ spray. Wear protective gloves/protective clothing/eye protection. In case of inadequate ventilation wear respiratory protection (a protective mask with an appropriate gas filter - i.e. type A1 according to standard EN 14387). IF ON SKIN: Wash with plenty of water/ soap. IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF exposed or concerned: Get medical advice/attention. Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F. Dispose of container to in accordance with local/ regional/national/international regulation. Persons already sensitised to diisocyanates may develop allergic reactions when using this product. Persons suffering from asthma, eczema or skin problems should avoid contact, including dermal contact, with this product. This product should not be used under conditions of poor ventilation unless a protective mask with an appropriate gas filter (i.e. type A1 according to standard EN 14387) is used. HPU-M50 9 3 5 0 6 2 9 2 1 8 3 0 2 PU-FOAM APPLICATION 3 1000 DANGER HAND SOUND INSULATION THERMAL INSULATION 38 YIELD Foam colour *33 - 38 litre Hobson Engineering Co Pty Ltd ABN 38 000 289 958 10 Clay Place, Eastern Creek NSW 2766 AUSTRALIA For SDS details and contact information visit: hobson.com.au Safety Data Sheet: 5635-44 Emergency Hotline: 1800 039 008 (All Hours) pg 5 pg 9 pg 15 pg 28 MULTIFUNCTION RIVETER $179.00 INC GST HFPR990 TradeTunes CONSTRUCTION YOUR NEAREST SYNERGY MEMBER: 50 x FREE ® FREE BOX WIRE WITH EVERY REBAR TIER PURCHASE SAVE UP TO $412 RT-40A-24PROMO1 – $2,497 (INC GST) RT-60A-24PROMO1 – $2,745 (INC GST) NOV/DEC/JAN 2024/25
SUPPLIERS CATEGORIES VISIT YOUR SYNERGY MEMBER FOR MORE INFORMATION Go to synergysystems.com.au to find your nearest Synergy Member Alemlube.........................................17 Aptella.............................................22 Austech Tools. ................................29 Austlift.......................................17, 24 Beaver Brands................................25 Bordo Industrial Tools......................29 Bostik. ..............................................5 Bremick. .........................................12 Brighton Best..................................24 Flextool...........................................10 Fosroc. ...........................................11 H.B. Fuller.........................................4 Hobson Engineering .........................5 Iccons.............................................21 Klingspor. .........................................3 Konstrukt...........................13 - 15, 18 Macnaught......................................16 Makita.............................................23 Mapei................................................8 PIP Global Safety.....................26 - 27 Ramset...........................................19 Rapidtool Australia............................9 Rawlplug.........................................20 Robert Bosch..................................22 Saint-Gobain.....................................3 Sika. .................................................7 Soudal..............................................6 Techware. .......................................25 The PPE Group...............................28 Abrasives.......................................................................... 3 Adhesives, Sealants, Fillers & Accessories. .................. 4 - 6 Building, Construction & Concrete Lifting .................. 7 - 11 Fasteners - General......................................................... 12 Hand Tools............................................................... 13 - 15 Lubricants, Corrosion & Accessories........................ 16 - 17 Material Handling & Storage..................................... 17 - 18 Masonry Anchors..................................................... 19 - 20 Merchandising. ............................................................... 21 Measuring - Precision Laser............................................ 22 Power Tools - Electric & Petrol. ................................ 22 - 23 Screws............................................................................ 24 Safety - Personal Protective Equipment. .................. 24 - 28 Tools - Cutting, Threading, Carbide & Diamond............... 29 Tools - Machinery & Workshop........................................ 29 2024 END OF YEAR SALE: Prices are valid to 31th January 2025. All prices are GST inclusive. Pricing may be subject to freight charges. Some advertised products may not be available at all store locations and may be subject to availability. Prices are valid while stocks last and we reserve the right to correct any errors or omissions without prior notice. Synergy Business Systems accepts no responsibility for any information deemed incorrect. It is up to the user to determine whether the product is suitable for the purpose for which it is to be used and that all safety precautions are adhered to.
CONSTRUCTION 3 NOVEMBER • DECEMBER • JANUARY • 2024/2025 END OF YEAR SALE Klingspor Abrasive Technology www.klingspor.com.au Part Number Description Price (Inc. GST) 325378 DS600B Cup grinding wheel 125mm $132.99 Part Number Description Price (Inc. GST) 336221 DT350U Diamond blade 350mm $134.97 347486 DT350U Diamond blade 400mm $190.53 DT350U Segmented diamond blade Product with laser-welded standard segments for universal use on general construction materials. Smooth, fast and low-vibration cutting with unmatched service life. Optimum price performance ratio. DT900B Segmented diamond blade Titanium-coated diamonds for first-rate cutting performance. Fast cutting speed even on reinforced concrete. Unrivalled service life. Designed for professional applications on concrete. Part Number Description Price (Inc. GST) 325081 DT900B Diamond blade 350mm $241.15 347490 DT900B Diamond blade 400mm $322.51 DT600U Segmented diamond blade Suitable for a variety of applications. Exceptional service life due to the use of premium grade raw materials and diamonds. First rate cutting performance. Part Number Description Price (Inc. GST) 322631 DT600U Diamond blade 125mm $40.29 322634 DT600U Diamond blade 230mm $80.47 DS600B Diamond cup grinding wheel Double row cup grinding wheel for machining concrete and abrasive materials. Efficient dust extraction. Aggressive grinding performance. Long service life. M14 adapter available.
4 CONSTRUCTION NOVEMBER • DECEMBER • JANUARY • 2024/2025 END OF YEAR SALE Adhesives & SEALANTS Made in Australia for Aussie trades & Aussie conditions FulaFlex™ 620™ is a high performance, hybrid polymer construction joint sealant. It cures to form a seal that is tough, elastic and weatherproof with good chemical resistance. FulaFlex™ 620™ is solvent and isocyanate free, low odour and low VOC. Max Bond Flexi-Floor is an elastomeric timber flooring adhesive based on PolyXSil Hybrid Enviro Technology™. It does not contain isocyanate, silicone, solvent or water and remains flexible after curing. Max Bond Flexi-Floor is suitable for indoor use, bonding of all types of timber floors to timber & cement based substrates commonly used as sub-floors. Fulaflex™ 650FC™ Sealant & Adhesive is a fast curing hybrid polymer construction and industrial adhesive/sealant. It is a high modulus product ideal for sealing expansion and control joints in floors, pavements, roadways, walls and roofs. Firesound™ is a premium quality, flexible acrylic construction sealant formulated to perform as a barrier to the passage of both fire and sound through construction joints and service penetrations in concrete, aerated concrete, block work, brickwork and fire-rated plasterboard. FulaFlex™ 650FC™ Fast Cure Sealant & Adhesive $13.50 FulaFlex™ 620™ Low Modulus Hybrid Polymer Sealant Max Bond® Flexi-Floor Hybrid Polymer Timber Flooring Adhesive Firesound™ Fire Rated Acoustic Sealant Ssg: 10010815 - $16.75 Pail: 10010255 - $198.00 Grey: 15019215 White: 15020186 Grey: 15020185 Black: 10013975 Black: 10013374 Monolith: 10016206 Masonry Grey: 10013373 Grey: 10013242 Off White: 10013375 White: 10013368 ALL PRICES INC GST $17.50 $25.50 $16.75
CONSTRUCTION 5 NOVEMBER • DECEMBER • JANUARY • 2024/2025 END OF YEAR SALE INTERIOR & EXTERIOR HIGHLY ELASTIC ADVANCED TECHNOLOGY LOW V.O.C UV AND WEATHER RESISTANT PAINTABLE EXCELLENT TOOLABILITY NO BUBBLING The SEAL ‘N’ FLEX® range offers superior adhesion on common building materials, and easy workability. PRODUCT CODE PRODUCT COLOUR SIZE 30619338 SEAL N FLEX 1 PLUS P590 EPPING GREY 600mL 30619340 SEAL N FLEX 1 PLUS P590 GREY 600mL 30619341 SEAL N FLEX 1 PLUS P590 LIMESTONE 600mL 30619342 SEAL N FLEX 1 PLUS P590 OFF WHITE 600mL 30619346 SEAL N FLEX 1 PLUS P590 SANDSTONE 600mL 30619337 SEAL N FLEX 1 PLUS P590 BLACK 600mL 30619348 SEAL N FLEX 1 PLUS P590 WHITE 600mL 30617376 SEAL N FLEX PREMIUM P795 WHITE 600mL 30619362 SEAL N FLEX PREMIUM P795 BLACK 600mL 30619364 SEAL N FLEX PREMIUM P795 GREY 600mL 30619350 SEAL N FLEX FACADE H725 BLACK 600mL 30619352 SEAL N FLEX FACADE H725 GREY 600mL 30619354 SEAL N FLEX FACADE H725 WHITE 600mL XFOAM™ PRO RANGE PU FOAMS AND CLEANER Part QFind Description Size Yield Box Price (ml) (L) (qty) (Incl. GST) MCFPUFM750 HPU-M50F Fire Manual Fire Resistant 750 38 12 $25.00 ea MCFPUDM750 HPU-M50 Hand Manual General Purpose 750 38 12 $15.50 ea MCFPUDB750 HPU-B50 2 in 1 Manual/Gun General Purpose 750 45 12 $19.30 ea MCFPUDP750 HPU-P50 Gun Gun Grade General Purpose 750 45 12 $16.25 ea MCFPUCB500 HPU-B Cleaner Manual Cleaner 500 - 12 $14.30 ea 500ml CLEANER 3 650 DANGER EASY CLEAN PU-CLEANER APPLICATION XFOAM PRO Cleaner dissolves fresh polyurethane (PU) foam and removes grease, oil, tar, wax and residue of adhesives and fresh sealants. It is used to clean guns, tools and workplaces, and should be used instead of sharp objects to cean only fresh PU foam. Application: use the spray cap mounted on the spraying accessory for manual cleaning. Activate the flow of the cleaner by applying pressure to the cap. Saturate a linen cloth or colourless paper in the cleaner and wipe the surface, then repeat this process with a clean cloth. Screw the can to the gun with an adapter for gun cleaning. Carefully press the trigger on the gun to remove the foam residue. Release the trigger when the cleaner starts to come out and leave it to work in the gun for 1–2 minutes. Press the trigger again and hold it until uncontaminated cleaner comes out. Repeat the procedure two or three times per gun cleaning and ensure that XFOAM PRO Cleaner does not corrode the surface. WARNING: Content: acetone Hazard statements: Extremely flammable aerosol. Pressurised container: May burst if heated. Causes serious eye irritation. May cause drowsiness or dizziness. Repeated exposure may cause skin dryness or cracking. Precautionary statements: If medical advice is needed, have product container or label at hand. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use. Wear protective gloves/eye protection/face protection. IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F. Dispose of container to in accordance with local/regional/national/international regulation. LABELLING OF CONTENTS (648/2004/EC) ≥30% aliphatic hydrocarbons. To be used before: see bottom of the can MCFPUCB500 CLEANER HPU-B Cleans foam dispensing equipment after use Hobson Engineering Co Pty Ltd ABN 38 000 289 958 10 Clay Place, Eastern Creek NSW 2766 AUSTRALIA For SDS details and contact information visit: hobson.com.au Safety Data Sheet: 5635-42 Emergency Hotline: 1800 039 008 (All Hours) 9 3 5 0 6 2 9 2 1 8 2 8 9 MPU-MCFPUCB500-CLEAN.indd 1 B d 30/07/2024 8:55:41 AM / WARNING: Content: diphenylmethanediisocyanate, isomeres and homologues; Alkanes C14-17, chloro. Hazard statements: Extremely flammable aerosol. Pressurised container: May burst if heated. Causes skin irritation. May cause an allergic skin reaction. Causes serious eye irritation. Harmful if inhaled. May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause respiratory irritation. Suspected of causing cancer. May cause harm to breast-fed children. May cause damage to organs through prolonged or repeated exposure. May cause long lasting harmful effects to aquatic life. Contains isocyanates. May produce an allergic reaction. Precautionary statements: Keep out of reach of children. Obtain special instructions before use. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use. Do not breathe vapours/ spray. Wear protective gloves/protective clothing/eye protection. In case of inadequate ventilation wear respiratory protection (a protective mask with an appropriate gas filter - i.e. type A1 according to standard EN 14387). IF ON SKIN: Wash with plenty of water/ soap. IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF exposed or concerned: Get medical advice/attention. Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F. Dispose of container to in accordance with local/regional/national/international regulation. Persons already sensitised to diisocyanates may develop allergic reactions when using this product. Persons suffering from asthma, eczema or skin problems should avoid contact, including dermal contact, with this product. This product should not be used under conditions of poor ventilation unless a protective mask with an appropriate gas filter (i.e. type A1 according to standard EN 14387) is used. 750ml Expanding Foam Filler GENERAL PURPOSE GUN GRADE Seals Insulates Expands GUN DISPENSER SOUND INSULATION THERMAL INSULATION 45 YIELD To be used before: see bottom of the can 9 3 5 0 6 2 9 2 1 8 3 1 9 MCFPUDP750 Foam colour HPU-P50 XFOAM PRO polyurethane (PU) foam hardens via air humidity and is suitable for sealing, fixing, insulating and filling. It will expand by 30–50%, be tack-free after 5–10 minutes and hard after 1.5–5 hours. It has excellent adhesion to construction materials such as wood, concrete, brick, marble, steel and aluminium, but no adhesion to silicone, polyethylene or PTFE. Application: before use, shake the can vigorously with the valve upside down. Place the can into the pistol with the black adapter screw. Press the trigger for foam and regulate its volume with the valve. Before replacing the can, shake the new one and immediately replace the empty can after unscrewing to prevent the PU from hardening in the adapter. Hardened PU residues in front of the nozzle can be mechanically removed. The can may remain on the pistol during short breaks, but the pistol should be cleaned with XFOAM PRO Cleaner before long breaks. Before using XFOAM PRO, moisten surfaces and ensure that they are clean and free from dust and grease. The ideal ambient and can temperature is 20–25°C (68–77°F). After use, immediately clean nozzle and store the can in a vertical position. PU-FOAM APPLICATION 3 1000 DANGER *40 - 45 litre Hobson Engineering Co Pty Ltd ABN 38 000 289 958 10 Clay Place, Eastern Creek NSW 2766 AUSTRALIA For SDS details and contact information visit: hobson.com.au Safety Data Sheet: 5635-45 Emergency Hotline: 1800 039 008 (All Hours) WARNING: Content: diphenylmethanediisocyanate, isomeres and homologues Hazard statements: Extremely flammable aerosol. Pressurised container: May burst if heated. Causes skin irritation. May cause an allergic skin reaction. Causes serious eye irritation. Harmful if inhaled. May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause respiratory irritation. Suspected of causing cancer. May cause damage to organs through prolonged or repeated exposure. Contains isocyanates. May produce an allergic reaction. Precautionary statements: Keep out of reach of children. Obtain special instructions before use. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use. Do not breathe vapours/ spray. Wear protective gloves/protective clothing/ eye protection. In case of inadequate ventilation wear respiratory protection (a protective mask with an appropriate gas filter - i.e. type A1 according to standard EN 14387). IF ON SKIN: Wash with plenty of water/ soap. IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF exposed or concerned: Get medical advice/attention. Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F. Dispose of container to in accordance with local/regional/national/ international regulation. Persons already sensitised to diisocyanates may develop allergic reactions when using this product. Persons suffering from asthma, eczema or skin problems should avoid contact, including dermal contact, with this product. This product should not be used under conditions of poor ventilation unless a protective mask with an appropriate gas filter (i.e. type A1 according to standard EN 14387) is used. MANUAL Application: before use, shake the can vigorously with the valve upside down. Remove the protection cap and screw the nozzle onto the valve. Invert the can and use the trigger on the adapter while tilting the valve to extrude the foam. Before using XFOAM PRO, moisten surfaces and ensure that they are clean and free from dust and grease. The ideal ambient and can temperature is 20–25°C (68–77°F). After use, immediately clean nozzle with XFOAM PRO Cleaner and store the can in a vertical position. GUN Application: before use, shake the can vigorously with the valve upside down. Place the can into the pistol with the black adapter screw. Press the trigger for foam and regulate its volume with the valve. Before replacing the can, shake the new one and immediately replace the empty can after unscrewing to prevent the PU from hardening in the adapter. Hardened PU residues in front of the nozzle can be mechanically removed. The can may remain on the pistol during short breaks, but the pistol should be cleaned with XFOAM PRO Cleaner before long breaks. The ideal ambient and can temperature is 20–25°C (68–77°F). After use, immediately clean nozzle with XFOAM PRO Cleaner and store the can in a vertical position. 750ml Expanding Foam Filler GENERAL PURPOSE 2 in 1 Seals Insulates Expands To be used before: see bottom of the can MCFPUDB750 Foam colour HPU-B50 9 3 5 0 6 2 9 2 1 8 2 9 6 3 1000 DANGER APPLICATION XFOAM PRO polyurethane (PU) foam hardens via air humidity and is suitable for sealing, fixing, insulating and filling. It will expand by 30–50%, be tack-free after 5–10 minutes and hard after 1.5–5 hours. It has excellent adhesion to construction materials such as wood, concrete, brick, marble, steel and aluminium, but no adhesion to silicone, polyethylene or PTFE. PU-FOAM HAND / GUN SOUND INSULATION THERMAL INSULATION 45 YIELD *38 - 45 litre Hobson Engineering Co Pty Ltd ABN 38 000 289 958 10 Clay Place, Eastern Creek NSW 2766 AUSTRALIA For SDS details and contact information visit: hobson.com.au Safety Data Sheet: 5635-43 Emergency Hotline: 1800 039 008 (All Hours) MPU-MCFPUDB750-2in1.indd 1 M 5 30/07/2024 8:55:09 AM 750ml Expanding Foam Filler GENERAL PURPOSE HAND Seals Insulates Expands To be used before: see bottom of the can MCFPUDM750 XFOAM PRO polyurethane (PU) foam hardens via air humidity and is suitable for sealing, fixing, insulating and filling. It will expand by 30–50%, be tack-free after 5–10 minutes and hard after 1.5–5 hours. It has excellent adhesion to construction materials such as wood, concrete, brick, marble, steel and aluminium, but no adhesion to silicone, polyethylene or PTFE. Application: before use, shake the can vigorously with the valve upside down. Remove the protection cap and screw the nozzle onto the valve. Invert the can and use the trigger on the adapter while tilting the valve to extrude the foam. Before using XFOAM PRO, moisten surfaces and ensure that they are clean and free from dust and grease. The ideal ambient and can temperature is 20–25°C (68–77°F). After use, immediately clean nozzle with XFOAM PRO Cleaner and store the can in a vertical position. WARNING: Content: diphenylmethanediisocyanate, isomeres and homologues; Alkanes C14-17, chloro. Hazard statements: Extremely flammable aerosol. Pressurised container: May burst if heated. Causes skin irritation. May cause an allergic skin reaction. Causes serious eye irritation. Harmful if inhaled. May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause respiratory irritation. Suspected of causing cancer. May cause harm to breast-fed children. May cause damage to organs through prolonged or repeated exposure. May cause long lasting harmful effects to aquatic life. Contains isocyanates. May produce an allergic reaction. Precautionary statements: Keep out of reach of children. Obtain special instructions before use. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use. Do not breathe vapours/ spray. Wear protective gloves/protective clothing/eye protection. In case of inadequate ventilation wear respiratory protection (a protective mask with an appropriate gas filter - i.e. type A1 according to standard EN 14387). IF ON SKIN: Wash with plenty of water/ soap. IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF exposed or concerned: Get medical advice/attention. Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F. Dispose of container to in accordance with local/ regional/national/international regulation. Persons already sensitised to diisocyanates may develop allergic reactions when using this product. Persons suffering from asthma, eczema or skin problems should avoid contact, including dermal contact, with this product. This product should not be used under conditions of poor ventilation unless a protective mask with an appropriate gas filter (i.e. type A1 according to standard EN 14387) is used. HPU-M50 9 3 5 0 6 2 9 2 1 8 3 0 2 PU-FOAM APPLICATION 3 1000 DANGER HAND SOUND INSULATION THERMAL INSULATION 38 YIELD Foam colour *33 - 38 litre Hobson Engineering Co Pty Ltd ABN 38 000 289 958 10 Clay Place, Eastern Creek NSW 2766 AUSTRALIA For SDS details and contact information visit: hobson.com.au Safety Data Sheet: 5635-44 Emergency Hotline: 1800 039 008 (All Hours) 750ml Expanding Foam Filler FIRE RESISTANT FIRE Seals Insulates Expands HAND FIRE RESISTANT SOUND INSULATION THERMAL INSULATION 38 YIELD To be used before: see bottom of the can MCFPUFM750 Foam colour HPU-M50F 9 3 5 0 6 2 9 2 1 8 3 2 6 3 1000 DANGER XFOAM PRO Fire is a low-flammability onecomponent polyurethane (PU) foam for sealing, filling, fixing, insulating and installing in cases that require higher fire resistance (electrical installations, cracks, fire-proof doors, vaults, etc). It has excellent adhesion to construction materials such as wood, concrete, gas concrete, brick, metal, glass and aluminium, but no adhesion to silicone, polyethylene or PTFE. It will expand by 30–50% after hardening via air humidity, be tack-free after 5–10 minutes and hard after 1.5–5 hours. Application: before use, shake the can vigorously with the valve upside down. Remove the protection cap and screw the nozzle onto the valve. Invert the can and use the trigger on the adapter while tilting the valve to extrude the foam. Before using XFOAM PRO Fire, moisten surfaces and ensure that they are clean and free from dust and grease. The ideal ambient and can temperature is 20–25°C (68–77°F). After use, immediately clean nozzle with XFOAM PRO Cleaner and store the can in a vertical position. Protect hardened foam from UV radiation. Flammability: B1 (DIN 4102-1) Report No. 200837 MPA Hannover; EI 240 (EN 13501-2) Report No. KB 3.2/16-129-9 MFPA Leipzig; B – s1, d0 (EN 13501-1) Report No. 4602T22-4 AFITI LICOF; (BS 476, part 20) Report No: WF 364023A/ 364023B Warringtonfire. WARNING: Content: diphenylmethanediisocyanate, isomeres and homologues Hazard statements: Extremely flammable aerosol. Pressurised container: May burst if heated. Causes skin irritation. May cause an allergic skin reaction. Causes serious eye irritation. Harmful if inhaled. May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause respiratory irritation. Suspected of causing cancer. May cause damage to organs through prolonged or repeated exposure. Contains isocyanates. May produce an allergic reaction. Precautionary statements: Keep out of reach of children. Obtain special instructions before use. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use. Do not breathe vapours/ spray. Wear protective gloves/protective clothing/eye protection. In case of inadequate ventilation wear respiratory protection (a protective mask with an appropriate gas filter - i.e. type A1 according to standard EN 14387). IF ON SKIN: Wash with plenty of water/ soap. IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF exposed or concerned: Get medical advice/attention. Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F. Dispose of container to in accordance with local/regional/national/international regulation. Persons already sensitised to diisocyanates may develop allergic reactions when using this product. Persons suffering from asthma, eczema or skin problems should avoid contact, including dermal contact, with this product. This product should not be used under conditions of poor ventilation unless a protective mask with an appropriate gas filter (i.e. type A1 according to standard EN 14387) is used. PU-FOAM APPLICATION *33 - 38 litre Hobson Engineering Co Pty Ltd ABN 38 000 289 958 10 Clay Place, Eastern Creek NSW 2766 AUSTRALIA For SDS details and contact information visit: hobson.com.au Safety Data Sheet: 5635-46 Emergency Hotline: 1800 039 008 (All Hours) MCFPUFM750 MCFPUDM750 MCFPUDB750 MCFPUDP750 MCFPUCB500 NEW FOR INSULATING | FILLING | INSTALLING FROM FROM FROM FROM FROM QUALITY FASTENERS SINCE 1935
6 CONSTRUCTION NOVEMBER • DECEMBER • JANUARY • 2024/2025 END OF YEAR SALE SOUDAFLEX FOR SEALANTS YOU CAN RELY ON, SOUDAFLEX 45FC PRO 146020 Grey - 600mL 146018 Black - 600mL 146019 White - 600mL $12.00 SOUDAFLEX 42FX $ 10.23 SOUDAFLEX 33SL SELF LEVELING SEALANT 130635 Grey - 600mL $20.23 SOUDAFLEX 20LM $13.66 SOUDAFLEX 36FL FLOOR JOINT SEALANT 130725 Grey - 600mL $20.23 147687 Concrete Grey - 600mL 146913 Black - 600mL 146956 White - 600mL 126923 Concrete Grey - 600mL 127291 Black - 600mL 127290 White - 600mL INCLUDES GST INCLUDES GST INCLUDES GST INCLUDES GST INCLUDES GST RELY ON THE EXPERTS IN SEALANTS WEATHERABILITY STRENGTH FLEXIBLE PROFESS IONAL GR ADE POLYURE THANE SE AL ANT S RED HOT DEALS ON OUR POLYURETHANE SEALANT RANGE!
7 CONSTRUCTION NOVEMBER • DECEMBER • JANUARY • 2024/2025 END OF YEAR SALE VOC-SCQMD Rule 1168 GREEN STAR CERTIFIED POT LIFE 18min @23°C VOC-SCQMD Rule 1168 GREEN STAR CERTIFIED FAST DRYING VOC-SCQMD Rule 1168 GREEN STAR CERTIFIED FAST DRYING LAYER THICKNESS 10 - 100 mm COMPRESSIVE STRENGTH MPa 75.0 MPa YIELD 10.2-10.8L per bag LAYER THICKNESS 10 - 150 mm COMPRESSIVE STRENGTH MPa 65 MPa YIELD 10.3-10.7L per bag LAYER THICKNESS 20 mm - 500 mm COMPRESSIVE STRENGTH MPa 70.0 MPa YIELD 9.8L per bag LAYER THICKNESS 10 - 100 mm COMPRESSIVE STRENGTH MPa 50-60 MPa YIELD 10.4-11.1L per bag
8 CONSTRUCTION NOVEMBER • DECEMBER • JANUARY • 2024/2025 END OF YEAR SALE Learnmore on mapei.com.au SOLUTIONS FOR CONCRETE REPAIR & WATERPROOFING $53.71 Planitop Smooth & Repair R4 R4 rated structural concrete repair mortar that skims down to 3 mm and builds as high as 40 mm on vertical, horizontal and overhead surfaces. 20 kg Product code 2653120 $16.42 Planitop Smooth & Repair R4 Same great features and benefits as the 20 kg bag, now available in a more convenient 5 kg size! 5 kg Product code 2653105A $49.61 Planitop LSN R3 Medium-strength concrete repair mortar designed for general structural elements. 20 kg Product code 2032120 $49.61 Planitop LSN R4 High-build concrete repair mortar, designed for major structural elements requiring high-strength repairs. 20 kg Product code 203520 $39.06 Planiseal 88 Cementitious mortar for waterproofing masonry and concrete structures. 20 kg Product code 937020 $134.29 Plastimul Bitumen waterproofing emulsion for general purpose use. 20 kg Product code 26120 All prices include GST.
9 CONSTRUCTION NOVEMBER • DECEMBER • JANUARY • 2024/2025 END OF YEAR SALE ® EOY DEALS! FREE BOX WIRE WITH EVERY REBAR TIER PURCHASE SAVE UP TO $412 RT-40A-24PROMO1 – $2,497 (INC GST) RT-60A-24PROMO1 – $2,745 (INC GST) 50 x FREE Cannot be used in conjunction with any other offers, special promotions or discounts. www.rapidtool.com.au SCAN QR CODE TO VIEW MORE PRODUCTS ® FREE REBAR TIER + FREE EXTENSION ARM WITH EVERY 20 BOX OF WIRE PURCHASE SAVE UP TO $4,350 20 BOXES OF WIRE (1000 COILS) – $6,999 (INC GST) TWG-1000A-24PROMO1 - FREE RT-40A REBAR TIER + FREE RT-EXA EXTENSION ARM TWG-1000B-24PROMO1 - FREE RT-60A REBAR TIER + FREE RT-EXA EXTENSION ARM 10% OFF ERB-16 REBAR BENDER + ERC-16 + ERC-20 REBAR CUTTER SAVE UP TO $179 FREE CUTTER BLOCK KIT WITH EVERY BRC-20X CORDLESS REBAR CUTTER PURCHASE SAVE UP TO $160 BRC-20X-24PROMO1 – $3,945 (INC GST) FREE 10% OFF ERB-16-24PROMO1 NOW ONLY $1,620 (INC GST) ERC-16-24PROMO1 NOW ONLY $882 (INC GST) ERC-20-24PROMO1 NOW ONLY $1,218 (INC GST) FREE FREE
10 CONSTRUCTION NOVEMBER • DECEMBER • JANUARY • 2024/2025 END OF YEAR SALE THE DAILY GRIND JUST GOT EASIER. WITH THE NEW SINGLE HEAD CONCRETE GRINDER. Flextool and BladeTec are registered trade marks of Parchem Construction Supplies Pty Ltd. Easy operator control Control panel positioned within easy reach for optimised control and safety Dust management system Floating dust shroud gives a tight seal, capturing harmful dust from escaping the grinding head. Fitted with 50 mm outlet for connection to vacuum system Folding handle 3 locking positions for transport and storage, changing of consumables and operation Easy Lock grinding shoe adaptor plate included • Fast and hassle-free changeover of grinding shoes • Compatible with universal Redi Lock system • Can also be operated with 250 mm (10 inch) grinding plates Floating head Self-levelling pivot follows the floor profile promoting even wear of the grinding shoes and plates Flextool Single Head Concrete Grinder FCG-250 FT100601-UNIT Direct drive system Delivers optimum grinding efficiency with full motor weight directly over the grinding head Detachable grinding head Quickly and easily separate the grinding head and motor from the main chassis for easier handling, transportation and storage Single phase electric motor 1.8 kW electric motor for use with standard 10 amp power outlet Adjustable handlebar Reversible with 3-way height adjustment for superior ergonomics Lifting hook Central lifting hook for easy and safe onsite handling SINGLE HEAD GRINDER FLEXTOOL BLADETEC GRINDING PLATE – 250 MM (VALUED AT $250) $3,624.50 INCL GST Application Colour Bond Type Number of Segments Diamond Grit Size Product Code General Purpose Concrete Grinding White Soft Bond 15 30/40 grit FT100472-UNIT BONUS
11 CONSTRUCTION NOVEMBER • DECEMBER • JANUARY • 2024/2025 END OF YEAR SALE ACHIEVE A FLAWLESS FINISH WITH FOSROC FLOORING SOLUTIONS NITOFLOR® PA » Two component solvent-free polyaspartic coating » Ideal for high traffic applications: food and chemical industries, hospitals, schools and kitchens » Fast return to service - accepts foot traffic after 2 hours, light veichle traffic after 24 hours* » Solvent free, 100% solids » Suitable for interior and exterior applications » Available as a clear coating and in a range of 8 colours FC605050-4L FOS NITOFLOR PA PTA CLEAR & COLOURS 4L FC605051-4L FOS NITOFLOR PA PTB CLEAR 4L FC605050-20L FOS NITOFLOR PA PTA CLEAR & COLOURS 20L FC605051-20L FOS NITOFLOR PA PTB CLEAR 20L AU 1800 812 864 fosroc.com.au NZ 0800 657 156 fosroc.co.nz At Fosroc we understand that your floors are often literally the base on which your business is built, so we ensure we get things right from the ground up. Fosroc. Future Proof. *At temperatures of 20 - 30°C, in cold weather a longer period before use may be required. Fosroc, Nitoflor and the Fosroc logo, are the trade marks of Fosroc International Limited, used under licence.
12 CONSTRUCTION NOVEMBER • DECEMBER • JANUARY • 2024/2025 END OF YEAR SALE NEW COUNTERSUNK STAINLESS STEEL 316 · Complies with AS5216 · National Construction Code Compliant HIGH PERFORMANCE SCREW ANCHORS *C1 & C2 Seismic Assessment, only applies to specific products NEW NEW NEW NEW NEW EXTENDED RANGE FLANGED HEX CERAMIC COATED FLANGED HEX ZINC PLATED COUNTERSUNK CERAMIC COATED PAN HEAD CERAMIC COATED ROD HANGER ZINC PLATED EXTERNAL THREAD CERAMIC COATED FLANGED HEX STAINLESS STEEL 316 For complete product specifications and pricing refer to Bremick’s ordering portal www.bremick.com.au C2 C1 * C2 C1 * C2 C1 * C1 C1 C1 EXTENDED RANGE SIZES 6 x 45mm to 10 x 140mm SIZES 6 x 45mm to 12 x 130mm SIZES 6 x 52mm to 10 x 100mm SIZES 6 x 50mm & 6 x 72mm 6 x 55mm (M8 & M10) Internal Thread 6 x 55mm (M8) 6 x 55mm (M10) SIZES 6 x 75mm to 12 x 125mm SIZES 6 x 80mm to 10 x 110mm Option 1
13 CONSTRUCTION NOVEMBER • DECEMBER • JANUARY • 2024/2025 END OF YEAR SALE • Heavy duty, high carbon steel • Full-length steel shaft • Ergonomic handle KONS-HAM-CLAWMET450 16OZ - 450G $19.95 KONS-HAM-CLAWMET560 20OZ - 560G $24.95 • Heavy duty, high carbon steel • Large strike face • Full-length steel shaft KONS-HAM-LUMP3LB 3LB $24.95 KONS-HAM-LUMP4LB 4LB $27.95 • Heavy duty, high carbon steel • Light weight fibreglass handle • Shock resistant rubberised grip KONS-HAM-SLEDGE10LB 10LB $49.00 KONS-HAM-SLEDGE12LB 12LB $59.00 • Sturdy Chrome Vanadium steel • Integrated, reversable ratchet system • Large spanner: 14mm, 15mm, 17mm and 19mm • Small spanner: 8mm, 10mm, 12mm, and 13mm KONS-4IN12PC 2 PIECE SET $69.95 SLEDGE HAMMERS 4 IN 1 RATCHET SPANNER SET ALL-STEEL CLAW HAMMERS ALL-STEEL LUMP HAMMERS NEW NEW NEW NEW HAMMERS & RATCHET SPANNERS ALL PRICES INCLUDE GST
14 CONSTRUCTION NOVEMBER • DECEMBER • JANUARY • 2024/2025 END OF YEAR SALE PREMIUM PLIERS & NIPPERS • Hardened cutting edges • High quality Chrome-Vanadium steel • Sturdy ergonomic or rubberised grips KONS-PLIER-ENDNIP200 200MM END NIPPERS $19.95 KONS-PLIER-CONNIP280 280MM CONCRETERS NIPPERS $22.95 • Hardened cutting edges • High quality steel • Sturdy ergonomic grips KONS-PLIER-COMB8 200MM COMBO PLIERS $16.95 KONS-PLIER-LONG8 200MM LONG NOSE PLIERS $16.95 KONS-PLIER-DIAG7 180MM DIAGONAL CUTTERS $16.95 • Reinforced adjustable pivot • Precision machined jaws • Sturdy ergonomic grips KONS-PLIER-MG250 250MM MULTIGRIP PLIERS $29.95 KONS-PLIER-MG300 300MM MULTIGRIP PLIERS $36.95 NIPPERS PLIERS MULTIGRIP PLIERS NEW NEW NEW ALL PRICES INCLUDE GST
15 CONSTRUCTION NOVEMBER • DECEMBER • JANUARY • 2024/2025 END OF YEAR SALE • Full steel construction • One-handed operation • Noses for 2.4mm, 3.8mm 4.0mm & 4.8mm rivets KONS-HPRG POP RIVETER $45.00 ONE-HANDED POP RIVETER KRIVETER MULTIFUNCTION RIVETING GUN KIT • 2 in 1 Pop Rivet and Nut Rivet tool • Convert between functions in 30 seconds • Kit contains 40 assorted nut rivets and 80 assorted pop rivets KONS-HNRPRKIT KRIVETER 2 IN 1 RIVET GUN KIT $179.00 2 1 IN Install 3.2 - 6.4mm pop rivets to create a strong mechanical bond Install M5, M6, M8 and M10 nut rivets to create a reusable threaded bolt hole • PERFORM BOTH FUNCTIONS WITH THE SAME TOOL • • CONVERT BETWEEN FUNCTIONS IN 30 SECONDS • NEW NEW ALL PRICES INCLUDE GST
16 CONSTRUCTION NOVEMBER • DECEMBER • JANUARY • 2024/2025 END OF YEAR SALE
CONSTRUCTION 17 NOVEMBER • DECEMBER • JANUARY • 2024/2025 END OF YEAR SALE A NEW RATCHET TIE-DOWN IS BORN! EXPERIENCE THE REVOLUTION IN RATCHET TIE-DOWNS WITH AUSTLIFT’S SWIFTCORE® PATENTED MECHANISM • • • • • • • •
18 CONSTRUCTION NOVEMBER • DECEMBER • JANUARY • 2024/2025 END OF YEAR SALE $14.95 FROM $199.00 FROM BONUS COMMERCIAL SHOVEL!* • 500 litres of secure storage • Fully welded cold rolled steel • Removable storage shelf • Dual gas struts • Also available in yellow KONS-SB700R 500L RED $649.00 COMMERCIAL GRADE WHEELBARROWS SITE BOX RATCHET TIE DOWNS MATERIALS HANDLING BONUS CASTOR SET!** Steel Tub • 200kg capacity • Resistant to UV damage • Heavy duty & reliable KONS-WBPT-PNW POLY TUB, PNEUMATIC TYRE KONS-WBPT-PPW POLY TUB, PUNCTURE PROOF TYRE KONS-WBST-PNW STEEL TUB, PNEUMATIC TYRE KONS-WBST-PPW STEEL TUB, PUNCTURE PROOF TYRE Poly Tub • 150kg capacity • Resistant to corrosion • Light weight & nimble *Free KONS-SHOVSMMDH Long Handled Commercial Shovel with any Konstrukt wheelbarrow purchase while stocks last **Free KONS-SBCASTORSET with purchase of KONS-SB700R Site Box while stocks last NEW ERGONOMIC TIE DOWN Designed specifically to reduce muscle strain caused by regular loading and unloading, our new Ergonomic Tie Down features a reverse action - increasing tension on the downstroke instead of the upstroke. Combined with an extended handle and double sprockets, this Tie Down reaches the same tension with significantly less effort from the operator. • Heavy duty hooks & keepers • High tenacity polyester webbing KONS-RTD-256500KG 25MMX6M - 500KG CAPACITY KONS-RTD-3561500KG 35MMX6M - 1500KG CAPACITY KONS-RTD-5092500KG 50MMX9M - 2500KG CAPACITY KONS-RTD-ERGO5092500KG 50MMX9M - 2500KG CAPACITY - ERGONOMIC HANDLE & REVERSE ACTION • AS/NZS 4380:2001 Standard Compliant • Sewn in warning & specification tags ALL PRICES INCLUDE GST
19 CONSTRUCTION NOVEMBER • DECEMBER • JANUARY • 2024/2025 END OF YEAR SALE
20 CONSTRUCTION NOVEMBER • DECEMBER • JANUARY • 2024/2025 END OF YEAR SALE
21 CONSTRUCTION NOVEMBER • DECEMBER • JANUARY • 2024/2025 END OF YEAR SALE THE CHUGGER $39.90 Keep cool and carry on, weekdays or weekends with ‘The Chugger’. • 1.2L swig bottle • Lockable lid • Comfort handle • Triple walled • Food grade, BPA & lead free • Sweat free design • Available in 3 colours AVAILABLE COLOURS WHY CHOOSE OUR DRINKWARE THE BARISTA $24.90 Fuel your caffeine cravings with ‘The Barista’. • 600mL tumbler • Splash-resistant slider lid • Removable magnetic slide • Triple walled • Food grade, BPA & lead free • Sweat free design • Available in 3 colours Triple walled Thick stainless steel & copper lining for maximum hot & cold performance. BPA & lead free Eliminated harmful chemicals and toxins. Sweat free design Prevents condensation for a comfortable grip. Food grade Ensures safety, taste and freshness. THE WEEKENDER $24.90 Say “Cheers” to cold beers all weekend long with ‘The Weekender’. • 375mL can cooler • Quick lock lid • Rubber lip holds your drink securely • Triple walled • Food grade, BPA & lead free • Sweat free design • Available in 3 colours THE ALL ROUNDER $49.90 Tip or sip, ‘The All Rounder’ can handle any beverage. • 950mL sipper bottle • Sipper and straw lid • Comfort handle • Triple walled • Food grade, BPA & lead free • Sweat free design • Available in 3 colours THE TANK $99.90 Call in ‘The Tank’ for backup! • 3.8L water jug • Comfort handle • Lockable lid • Triple walled • Food grade, BPA & lead free • Sweat free design • Available in 3 colours THE EASY RIDER $24.90 Upgrade your ride with this adaptable car cup holder. • Expandable base to fit various middle consoles • Soft rubber-internals to hold your drinkware securely • *Available only in black THE EARLY BIRD $34.90 The Early Bird gets the worm, but needs a big coffee to do it! • 850mL tumbler • Splash-resistant slider lid • Removable magnetic slide • Comfort handle • Triple walled • Food grade, BPA & lead free • Sweat free design • Available in 3 colours PRODUCT CODE BUSH GREEN BLACK ROCK RED DESERT DESCRIPTION PRICE ICYCAN375- BG BR RD THE WEEKENDER 375ML INSULATED CAN COOLER $24.90 ICYTUM600- BG BR RD THE BARISTA 600ML INSULATED TUMBLER $24.90 ICYTUM850- BG BR RD THE EARLY BIRD 850ML TUMBLER WITH HANDLE $34.90 ICYTUM950- BG BR RD THE ALL ROUNDER 950ML TUMBLER WITH HANDLE & SIPPER $49.90 ICYSWG1200- BG BR RD THE CHUGGER 1.2L SWIG BOTTLE $39.90 ICYJUG3800- BG BR RD THE TANK 3.8L WATER JUG $99.90 ICYCUP THE EASY RIDER EXPANDABLE CAR CUP HOLDER $24.90 HOW TO ORDER Select PRODUCT CODE, then select the COLOUR CODE Example: ICYCAN375-BG Bush Green Black Rock Red Desert ALL PRICES INCLUDE GST
CONSTRUCTION 22 NOVEMBER • DECEMBER • JANUARY • 2024/2025 END OF YEAR SALE aptella.com BONUS iMEX 1200mm and 2000mm Spirit Level VALUED AT $325 BONUS iMEX LD100 Detector VALUED AT $205 Topcon DT-309 Digital Theodolite iMEX LX3DG Multi-line Line Laser Green Beam $6,145INC GST $799INC GST *Terms and Conditions apply. Not to be used with any other promotion or discount Available between 1st of November 2024 to the 31st of January 2025 TOPCON AND iMEX LASER BONUS Purchase a Topcon or iMEX laser and get bonus items* 1034419-08 012-LX3DG 002-SP120 002-SP200
23 CONSTRUCTION NOVEMBER • DECEMBER • JANUARY • 2024/2025 END OF YEAR SALE E&OE / N001-24 POWER WITHOUT LIMITS™ 40V Max Brushless 270mm (10-5/8”) Circular Saw HS011GZ • Guide rail compatible saw base adapts with optional guide rails to provide perfectly straight cut 80V Max (40Vx2) Brushless Hex Shank Demolition Hammer HM004GZ01 • Heavy duty power delivering 72.8J of hitting energy • Anti-Vibration Technology (AVT) 40V Max Brushless 1,200mm Concrete Vibrator VR004GZ • Dual power modes: Power mode & Standard • XPT for protection against dust and moisture 40V Max Brushless 230mm (9”) Power Cut CE003GZ • Cutting speed up to 45% faster than the LXT equivalent • Active Feedback Sensing Technology (AFT) 40V Max Brushless 185mm (7-1/4”) Metal Cut Saw CS002GZ • High power brushless motor allows for a massive 67mm cutting depth • Safety protection with electric brake and soft start for user safety 40V Max Brushless 40mm SDS Max Rotary Hammer HR005GZ • Heavy duty power hitting at 8.0j^ of impact energy • AFT - Anti Kickback Control 40V Max Brushless 2 Piece Combo Kit DK0114G209 • Kit includes: HP001GZ, TD001GZ, 2x BL4040, DC40RA & tote bag (832319-7) 40V Max Brushless 6 Piece Combo Kit DK0153G601 • Kit includes: HP001GZ, TD001GZ, GA013GZ, HR001GZ, HS003GZ, JR001GZ, 2x BL4040, DC40RA & tool bag (832367-6) $1,139 $2,779 $2,999 $659 $779 $999 $999 $719 REDEMPTIONS FREE Scan QR Code to view current promotions ALL PRICES INCLUDE GST
CONSTRUCTION 24 NOVEMBER • DECEMBER • JANUARY • 2024/2025 END OF YEAR SALE • • • • • •
CONSTRUCTION 25 NOVEMBER • DECEMBER • JANUARY • 2024/2025 END OF YEAR SALE Safety Products NEW PRODUCTS CODE: EPX373 Phoenix Safety Glasses - Clear Lens $14.58 ea Inc GST $121.00 ea Inc GST $40.25 ea Inc GST CODE: EPX374 Phoenix Safety Glasses - Smoke Lens $14.58 ea Inc GST $17.05 ea Inc GST CODE: GNW166 SUPAFLEX DriGrip Liquid Resistant Glove EN388:2016 4231A $8.71 pair Inc GST Available in S - 2XL Certified to AS/NZS 1337.1:2010 Certified to AS/NZS 1270:2002 Certified to AS/NZS 1270:2002 Certified to AS/NZS 1716:2012 Certified to AS/NZS 1801:1997 Certified to AS/NZS 1337.1:2010 Available in S - 2XL CODE: GNB205 Black Ace Disposable Nitrile Gloves Unpowdered - Box 100 NEW PRODUCTS CODE: HRE661-BT Maxisafe Bluetooth Earmuff 28dB - Class 5 CODE: HRE646 Maxisafe Helmet Earmuff 27dB - Class 5 SLC80 27dB $25.20 ea Inc GST CODE: HVB570-W White Broad Brim Vented Hard Hat - Ratchet READY 2 WORK SET $2704.16 ea Inc GST CODE: R304100 Ready 2 Work CA-40G & CA AerGo Includes: PRSL filters, comfort belt, QL hose, charger, battery All prices include GST
26 CONSTRUCTION NOVEMBER • DECEMBER • JANUARY • 2024/2025 END OF YEAR SALE
27 CONSTRUCTION NOVEMBER • DECEMBER • JANUARY • 2024/2025 END OF YEAR SALE • Adjustable wing & clamp • Fit and forget attachment once adjusted into place • Ensures safety of user on & off the ladder • Kit includes: Essential Harness, 15m Kernmantle Rope with Rope Grap & Thimble Eye, & Permanently Attached Shock Absorber, Anchor Strap Endless 25mm - 1.5m, 22kN Rating, Screw Gate Karabiner, LINQ Premium Backpack • Boasting a minimum breaking strength of 15kN • Easy to use camlock, no fixing required • Quick installation & removal HSLDBR KITRBSC-BP HSRTBA LINQ LADDER BRAQ-IT LINQ BASIC ROOFERS KIT WITH PREMIUM BACK PACK LINQ TEMPORARY ANCHOR TETHA T-BAR INC GST $395.00 INC GST $125.00 INC GST $139.00 • Class 4 SLC80 25dB protection • PowerSoft Foam Hybrid Plug technology • Just Insert & Twist! The fastest fitting foam ear plugs • Class 4 SLC80 22dB protection • Powersoft foam technology for optimal expansion recovery time • Innovative T-shape makes fitting & removal simple • Class 4 SLC80 22dB protection • Powersoft foam technology for optimal expansion recovery time • Innovative T-shape makes fitting & removal simple 267-HPF610-50 267-HPF510 267-HPF510C POWERSOFTTM EZ-TWISTTM HYBRID UNCORDED EARPLUGS - 50 PAIRS POWERSOFTTM MEGA T-FITTM UNCORDED EARPLUGS - 200 PAIRS POWERSOFTTM MEGA T-FITTM CORDED EARPLUGS - 100 PAIRS $29.00 INC GST $50.00 INC GST $50.00 INC GST
28 CONSTRUCTION NOVEMBER • DECEMBER • JANUARY • 2024/2025 END OF YEAR SALE HFPR990 TradeTunes Bluetooth 5.0 Technology: Enables hands-free calling and wireless music. Built-In Rechargeable Battery: Includes USB charging cord. Performance Tested to AS/NZS 1270 Class 5, 28dB: Medium to high noise applications. EFPR940 HPFPRGTE01 Lens Cleaning Station Essential Type 1 Ratchet Hard Hat Convenient dispensing ensuring a simple one stop cleaning solution Wall-mountable design Universal compatibility making it suitable for all types of eyewear Australian made Premium ratchet for a custom fit Internal harness with crown strap spreader 30mm accessory slot HFPR958/959 GT Earmuff Class 5, 26dB Hi-vis cups for enhanced visibility 25mm & 30mm Compatibility Low clamp force for extended wear AS/NZS 1270:2002 Lic.SMK40540 2 Carry Case Included Australian Standard AS/NZS 1801:1997 Lic. No. BMP 778971 $4400 $3300 $3300 Stretch Denim Jeans Midweight Cotton Stretch Cargo Trousers With Biomotion Reflective Tape Recycled Anti-Microbial Micromesh Short Sleeve Taped Polo Shirt DT1156 DT1170T2 TS2415T1 22% Stretch: Designed for flexibility and dynamic movement Five Pockets: Ample storage for everyday essentials Twin needle Sewn: Reinforced seams, providing additional strength Modern Fit: Comfortable tapered finish down towards the ankle Static Electricity Control: Tested to Standard AS/NZS 1020:1995 Midweight: Cotton fabric that is both durable and comfort 22% Stretch: Designed for flexibility and dynamic movement Bio-motion Tape: High-visibility materials tested to Standard AS/ NZS 1906.4:2010 Ample Storage: Engineered to accomodate a variety of tools Recycled: Made from Recycled Anti-Microbial Polyester Segmented Tape: To enhance comfort and mobility Double Hoop Tape Configuration: For increased visibility Lightweight: Extra lightweight 100% Polyester fabric DTW1156-NAV 6-22 DT1156-NAV 77R-112R, 87S-132S DTW1170T2-NAV 6-24 DT1170T2-NAV 77R-112R, 87S-132S, 79L-94L TS2415T1-Y/N XS-5XL TSW2415T1-Y/N 8-24 TS2415T1-O/N XS-5XL TSW2415T1-O/N 8-24 Also Available in Womens DTW1156 Also Available in Womens DTW1170T2 Also Available in Womens TSW2415T1 $1980 $2970 $9900 $2640 INC GST INC GST INC GST HFPR958 - WHITE HFPR959 - GREY INC GST INC GST INC GST INC GST BSI Certified Product AS/NZS 1906.4:2010 AS/NZS 4602.1:2011 BSI Certified Product AS/NZS 1906.4:2010 AS/NZS 4602.1:2011
RkJQdWJsaXNoZXIy ODM0MDI=